66a67,69
> // Revision 1.16  2002/07/29 21:16:18  gorban
> // The uart_defines.v file is included again in sources.
> //
242,242c255,255
< assign wb_adr_int = wb_adr_is;
---
> assign wb_adr_int = wb_adr_is;
243,243c256,256
< 
---
> 
268a272,273
> reg [1:0] wb_adr_int_lsb;
> 
269a275,275
> begin
277a284,304
>   `ifdef LITLE_ENDIAN
> 	case (wb_sel_is)
> 		4'b0001 : wb_adr_int_lsb = 2'h0;
> 		4'b0010 : wb_adr_int_lsb = 2'h1;
> 		4'b0100 : wb_adr_int_lsb = 2'h2;
> 		4'b1000 : wb_adr_int_lsb = 2'h3;
> 		default : wb_adr_int_lsb = 2'h0;
> 	endcase // case(wb_sel_i)
>   `else
> 	case (wb_sel_is)
> 		4'b0001 : wb_adr_int_lsb = 2'h3;
> 		4'b0010 : wb_adr_int_lsb = 2'h2;
> 		4'b0100 : wb_adr_int_lsb = 2'h1;
> 		4'b1000 : wb_adr_int_lsb = 2'h0;
> 		default : wb_adr_int_lsb = 2'h0;
> 	endcase // case(wb_sel_i)
>   `endif
> end
> 
> assign wb_adr_int = {wb_adr_is[`UART_ADDR_WIDTH-1:2], wb_adr_int_lsb};
>